Our new DIY Paint Protection Film Kit (PPF) for Tesla Model 3 / Y 'High Wear Areas" is the perfect solution to guard against wear & tear on your Tesla paint!  The CNC-cut paint protection film has been patterned specifically for the 2017-Present Tesla Model 3 or the 2020-Present Tesla Model Y.  We have two unique kits, one specifically for Model 3 and one specifically for Model Y.  Unlike more generic kits, our bumper shelf template extends OVER the edge of the bumper (not just covering the shelf), protecting the most prone area / edge against damage and scratches.   Now when your gear drags across the bumper, rest assured it wont scratch the paint.  And we make the kit with or without parking sensor cut outs, to exactly match your bumper! 

Each DIY kit comes complete with the PPF film, two spray bottles, and two squeegees for installation.   To install our PPF film, after thoroughly washing your vehicle and the applicable areas which get PPF coverage, generously spray the film (top and bottom sides) and car with a soapy water mix (in one spray bottle -  the 'slip' bottle), apply and slide the soaked PPF film into place on the wet surface, and then carefully & lightly squeegee the water out from the center of the PPF film to the edges of the film.   Working out any excess soapy water, air bubbles or wrinkles - if necessary, carefully lift up the PPF and re-wet it (spray the 'slip' solution) or re-align as needed.  It takes some patience, but anyone can do the installation.   To help secure the PPF film edges in place, the second spray bottle (the 'stick' bottle) can be filled with a 30% isopropyl alcohol / 70% water mix, which can be sprayed under corners or edges of the PPF to help 'stick' (secure) the film during squeegee working.

The DIY kit is offered with "one PPF film set" or "two PPF film sets".  If you're confident and experienced and only need one single film set, save a few bucks and go for it!  If you are a beginner and / or want a backup PPF film or a PPF practice film, we offer a deal on a "two PPF film set", which includes two complete sets of PPF films.  

Specifications:

• Easy DIY wet, peel & apply application 
• Install tools included
• Self healing paint protection film, lasts up to 10 years
• TMaxx Self-Healing Clear Gloss Paint Protection Film
• Designed and cut in the USA
• Fits
• Tesla Model 3 (2017-Present)
• Tesla Model Y (2020-Present)
• Compatible with all bumper variations, with or without parking sensors 
• PPF kits do not obstruct parking sensors

What is included:

• PPF Films (either one or two sets of the following):
• Rear bumper edge (1 piece)
• Door sills (front and rear, 4 pieces)
• Door edges (front and rear doors, 8 pieces (a spare set included))

• Door handles (front and rear doors, 8 pieces (a spare set included))

• 2 Spray bottles (Slip Bottle / Tack Bottle)
• 2 Squeegees (Narrow / Wide)