Rivian R1T, R1S & R2 Wheel and Tire DIY Installation Instructions Guide
Rivian Wheel & Tire DIY Installation Instructions
Everything you need to install your new EV Sportline wheels and tires at home, from the right tools and safe lifting to lug nut torque, TPMS and tire pressure.
For Rivian R1T, R1S & R2
Install Your Rivian Wheels & Tires Like a Pro
A new wheel and tire package is one of the easiest ways to change how your Rivian looks and drives. With the right equipment, many Rivian owners do the installation at home.
Whether you're installing new wheels, switching to a winter or off-road set, or going back to your factory wheels, this guide walks you through each step on the R1T, R1S and R2.
Rivian Wheel Install Specs at a Glance
| Spec | R1T / R1S | R2 |
|---|---|---|
| Lug nut torque | 140 lb-ft (190 Nm) | 140 lb-ft (190 Nm) |
| Jack points | Behind each front tire and in front of each rear tire, under a round cover | Behind each front tire and in front of each rear tire |
| Tire Change mode | Optional (Settings > Vehicle > Service) | Not part of Rivian's R2 procedure |
| TPMS update | Drive 15 minutes or longer at highway speeds | Drive 15 minutes or longer at highway speeds |
Always confirm specs for your vehicle in the Rivian Owner's Guide.
Watch Our Rivian Wheel Installation Video
Follow along with our step-by-step video before you start your wheel and tire upgrade.
Rivian R1T / R1S Wheel & Tire Installation Guide
The full install on an R1T / R1S, step by step. On the R2 the process is the same apart from the lifting setup covered in the steps below.
What You'll Need
- 22 mm socket, breaker bar and a torque wrench that reaches 140 lb-ft
- Hydraulic floor jack rated for at least 3 tons
- Jack pad pucks (R1T / R1S)
- Wheel chocks
- Tire pressure gauge or inflator
- A firm, level place to work
Recommended Tools for DIY Installation
The right tools make installation easier and protect your Rivian, wheels and lug nuts. These are the tools we recommend for Rivian wheel and tire installs. You'll also need a hydraulic floor jack rated for at least 3 tons.
Team 1EV Wheel & Tire DIY Home Install Tool Kit
22 mm protective impact socket, 24" breaker bar, click-type torque wrench (44–243 lb-ft) and a 0–50 psi tire gauge. Fits the R1T, R1S and R2.
SHOP COMPLETE TOOL KIT →Team 1EV Scout Series Jack Pad Pucks
Billet aluminum pucks that sit in the R1T / R1S jack point openings, so your floor jack reaches the frame lift point without touching the underbody panels.
SHOP JACK PAD PUCKS →Step-by-Step Rivian Wheel & Tire Installation
These general instructions supplement our video and the Rivian Owner's Guide.
- Prepare your Rivian. Park on firm, level ground and shift into Park. The electronic parking brake only holds the rear wheels, so chock both sides of the tire diagonally opposite the one you're lifting. R1T and R1S (optional): Tire Change mode (Settings > Vehicle > Service) pauses automatic suspension adjustments while the vehicle is lifted. It isn't required, and with it on, some floor jacks may not reach the jack points.
- Confirm your new wheels and tires. Make sure the wheels are made for your vehicle, and check tire size, load rating and lug nut fit. If your package uses directional tires or different front and rear sizes, note where each wheel goes.
- Position the jack correctly. Lift only at Rivian's jack points: behind each front tire and in front of each rear tire, near the rocker panel. R1T and R1S: remove the round jack point cover by pressing on its inner edge, place a jack pad puck in the opening, and center a floor jack rated for at least 3 tons under the puck. R2: keep the jack straight and level, and aligned with the jack point opening. Never place a jack or jack stand under the battery pack or the underbody panels.
- Loosen the lug nuts. Raise the jack until it just starts to take weight, with the tire still on the ground. Use the 22 mm socket and breaker bar to loosen each lug nut about a half turn counterclockwise. Don't remove them yet.
- Raise the vehicle. Lift only until the tire clears the ground. Use appropriate safety support where required. Never place any part of your body under the vehicle or in the wheel well while it's lifted, and don't push or pull on the vehicle while it's on the jack.
- Remove the factory wheel. Remove the lug nuts, grip the tire tread and pull the wheel straight off the hub. Rivian wheel and tire assemblies are heavy, so lift with your legs and avoid hitting the brake caliper or bodywork. If a wheel won't come off, don't force it while the vehicle is lifted; contact Rivian or our team for help.
- Inspect the mounting surfaces. Check the hub face and the back of the new wheel for dirt, rust, debris or damage. Clean them so the wheel sits flat against the hub.
- Install your new wheel. Line the wheel up with the studs and push it fully onto the hub. Start every lug nut by hand to prevent cross-threading, then snug them evenly in a star pattern while the wheel is still off the ground. Make sure the wheel sits flush and even on the hub.
- Lower and torque the wheel. Lower the jack until the tire touches the ground but isn't carrying the vehicle's full weight. With a calibrated torque wrench, tighten the lug nuts in a star pattern to 140 lb-ft (190 Nm), Rivian's specification for the R1T, R1S and R2. Then lower the vehicle fully and remove the jack. Always confirm the specification for your vehicle in the Rivian Owner's Guide.
- Repeat and finish up. Install the remaining wheels, set the tire pressures and confirm every lug nut is torqued. On the R1T and R1S, put the jack point covers back, and turn off Tire Change mode if you used it. Update the Wheels and tires setting on the center display (on R1T and R1S: Settings > Vehicle > Service > Wheels and tires) so range estimates match your new setup. Then drive 15 minutes or longer at highway speeds so the TPMS sensors can report each tire's pressure. More in our Rivian TPMS guide.
Rivian Tire Inflation Guide
Where to find your tire pressure, why it matters and how to check it
Where Do I Find the Correct Tire Pressure?
Your Rivian's recommended cold tire pressure is printed on the Tire and Loading Information label on the driver's door pillar, visible when you open the driver's door.
The label lists the factory tire sizes and recommended cold pressures. Your Rivian also displays live tire pressure readings from its TPMS sensors.
If your new tires are a different size or load range than your factory tires, such as LT all-terrain tires, confirm the right pressure with EV Sportline or a qualified tire professional. Heavy loads and towing can also call for different pressures.
Why Proper Tire Inflation Matters
Rivians are heavy, powerful EVs, so tire pressure has a big effect on how they drive.
How to Check and Adjust Tire Pressure
- Check when cold. Ideally, let the vehicle sit for at least three hours before you measure.
- Find your target PSI. Read the Tire and Loading Information label on the driver's door pillar.
- Measure each tire. Remove the valve cap and use an accurate gauge or an inflator with a pressure display.
- Inflate or adjust. Add or release air until each tire reaches the correct cold pressure.
- Verify and finish. Recheck each tire and reinstall the valve caps.
Helpful tip: Tire pressure drops about 1 PSI for every 10°F drop in outside temperature. Check your tires at least once a month and before long trips.
Don't let air out of warm tires to reach the cold PSI. Driving heats the tires and raises pressure temporarily.
Our Recommended Tire Inflator
AMaxx Rechargeable Digital Tire Inflator – Cordless Portable Air Pump
SHOP AMAXX TIRE INFLATOR →After Installation: Final Checklist
Before you drive, complete these checks:
- All four wheels are in their correct positions and fully seated.
- Every lug nut is torqued to 140 lb-ft (190 Nm).
- All tires are set to the correct cold pressure.
- Valve caps and center caps are installed securely.
- Nothing touches the brakes, suspension or bodywork.
- R1T / R1S: the jack point covers are back in place, and Tire Change mode is off if you used it.
- The Wheels and tires setting matches your new setup.
- All four tires show a pressure reading after 15 minutes or more of highway driving.
On your first drive, start slowly and pay attention to any vibration, noise or change in handling. If anything seems wrong, stop somewhere safe and check the installation before you continue.
Frequently Asked Questions
Can I install EV Sportline wheels on my Rivian myself?
Yes. Many Rivian owners install their own wheel and tire packages with the right tools and lifting procedure. If you'd rather not, we can install them for you at EV Sportline in Van Nuys, CA or Atlanta, GA, or you can use a qualified tire shop.
Do EV Sportline wheel and tire packages arrive ready to install?
Our wheel and tire packages ship mounted and balanced with TPMS sensors installed, ready to bolt on. Check your order, including TPMS sensors and lug hardware, before you start.
What is the correct Rivian lug nut torque?
Rivian specifies 140 lb-ft (190 Nm) for the R1T, R1S and R2, tightened in an alternating star pattern. Always confirm the specification for your vehicle in the Rivian Owner's Guide.
Do I need jack pad pucks?
On the R1T and R1S, they're the easiest way to use a floor jack. The jack points sit inside openings under round covers, and a puck lets the jack reach the lift point without touching the underbody panels. Without pucks, Rivian's procedure for non-Rivian jacks has you remove the underbody panels first.
Do I need to change any settings after installing new wheels?
Yes. Update the Wheels and tires setting on the center display (on R1T and R1S: Settings > Vehicle > Service > Wheels and tires) so range estimates match your setup. If your exact setup isn't listed, choose the closest match. If you turned on Tire Change mode on an R1T or R1S, turn it off when you're done.
Will my Rivian recognize the TPMS sensors in my new wheels?
On the R1T and R1S, factory Rivian TPMS sensors and EV Sportline's Rivian-spec sensors normally sync on their own as you drive, with no button to press (see our Rivian TPMS guide). On any Rivian, allow 15 minutes or more of highway driving for tire pressures to update. If a tire still shows no reading after that, contact us.
How often should I check my Rivian's tire pressure?
At least once a month, before long trips, and whenever outside temperatures change significantly.
Can I rotate my Rivian's tires?
Many Rivian wheel and tire setups can be rotated, but directional tires and different front and rear sizes limit the rotation pattern. Check your setup before rotating.
Need Help With Your Installation?
We're here to help you get the most from your Rivian wheel and tire upgrade. If you have questions about fitment, tools, TPMS, tire pressure or your package, contact our team.
Email: support@evsportline.com
Prefer we do it? We install wheels and wheel & tire packages at EV Sportline in Van Nuys, CA and Atlanta, GA. See our install service.
SHOP R1T TOOLS → SHOP R1S TOOLS → SHOP R2 TOOLS →